Changing housing on their own mobile phone

Mobile phones have virtually everyone. But over time his condition worsens. Appear scrapes, scratches, chips and stuff. Update your phone will replace the housing or panel. After the change of the phone will look almost like new. In the workshops for the complete replacement housing will need to lay out about 500 rubles (it all depends on the model). But can this amount to save and change the body itself.
Panel of most phones is removed very easily. And simply put, too. The only thing to note - is on display. Rent panel must be carefully so as not to damage it. Also, in some models (eg, Nokia 5310) on the perimeter of the top panel is the train on which are mounted side buttons and power button, if you damage it, then, accordingly, these buttons will not work. The panel is removed quite simply, need her to pick up something with a sharp edge (I'm doing a fingernail) and further that it neatly into the gap formed the old SIM card.
Particular attention should be given to replace the shell clamshell or slider. Between the two parts of these phones is the train, which is also not necessary to tear or damage. It is best to disassemble the phone parts, and gently flip the board.
In phones, in which the panel is screwed to the main part of the case, you will need to unscrew all the screws (better look at the new panel, where they are to unscrew everything and not to touch those who do not have to twist, respectively). Screwdriver for disassembly sold quite frequently and cost about 50 rubles. apiece.
Before you rip all the labels protective film from the cabinet to check it out as he got on the phone (because without them, it may not exchange defective goods). For a better insertion recommend buying a case the original (though not the original is also possible to buy very good quality). And after all this will be verified can be very delighted practically new telefonu.1.5